AS type Overrun Clutch For Tractor roller type freewheel non bearing supported

AS type overrunning clutch is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside dimensions are the same as series 62.. ball bearings. A typical arrangement is to install this type alongside a series 62 bearing within the same location tolerances, as shown on the following page. The inner race is keyed to the shaft (except 6 mm bore). The outer race has a positive r6 tolerance to give a press fit in a H7 housing. The outer housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.

• FAQ:

• 1. What is your the payment condition?

  For regular products,No advance payment is needed, you can make 100% payment before shipment accordingly.

  For customized products,our payment term normally is 30% of advance, the balance 70% against copy of BOL.

  For our long term customers,you can pay 1 month after receiving the good.

  2. What is your sales turnover?

  Our whole year sales turnover in 2023 to 2024 is 11 million dollars

  3. Do you have any certifications?

  Yes, We are an IATF16949 certified needle bearings manufacturer since 2011.

• 4.What about the lead time?

• Our production period is 30-45 days

• 5.What is your production capacity?

• We are able to produce over 100 million pieces of bearings per year with different sizes and types

• About us:

• ChangzhouZhihua Bearings Co.,Ltd. is an ISO9001 & TS16949 certified company which specializes in manufacturing high quality drawn up needle roller bearings, cylindricial roller bearings and Related Components. We registered our own Trade Mark "CZH" in 2011.

  Founded in 2004, CZH has grown to be one of the leading Manufacturer of Needle Roller Bearings, Cylindrical Roller Bearings. CZH is capable of Manufacturing both standard and custom bearings, we are dedicating to provide high quality products with competitive price since establishment. With the support of it's Engineering Department CZH is able to offer solutions and new projects which well suit the different requirements.

  CZH's Know-how, Innovation, Solution and the most up-to-date production system are making CZH expand and develop constantly.

  Our products are competitive worldwide.

  Allow us an opportunity to use our expertise to meet your bearing needs.

ASNU type overrunning clutches are a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63.. ball bearing. A typical arrangement is to install this type alongside a bearing within the same location tolerances, as shown on the following page. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.

AS Type Overrun Clutch For Tractor

Overrun Clutch For Tractor Roller

Overriding Clutch For Tractor Non Bearing

AS type Overrun Clutch For Tractor roller type freewheel non bearing supported Images